2024 SmithCo Side Dump Trailers SX5 SX5 4938

Information

2024 SmithCo Side Dump Trailers SX5 SX5 4938

SmithCo’s SX5 Five Axle side dump trailer is similar to the four axle model, but features a liftable/steerable axle added behind the landing leg area. The location of this axle helps equalize the weight between the truck axles and the rear trailer axle group.

The SX5 side dump trailer works well in most states that have a cap gross weight allowed of up to 108,500 lbs.

Features may include:
  • 37 to 49 foot frame lengths
  • Stockpile or windrow
  • Watertight; no leaks
  • Low load height
  • Dumps toward either side
  • 1st & 5th steerable axle options
  • AR400 Steel Tub, One Piece Floor
  • 80/100 KSI Steel Frames
  • Self-Aligning, Spherical Bearing Hinges
  • External Column Tub Supports
  • No Center Tub Divider
  • Shot Blast Paint Prep
  • Polyurethane Paint

Photos

Highlights

  • Buellton, California
  • 2024
  • SmithCo Side Dump Trailers
  • SX5 SX5 4938
  • Fenders: Front & Rear, 1/4" Synthetic, 7 Degree Slope
  • Available
  • 102”
  • 8’ 7” at Tub side, 9’ 10” at Center

Specifications

  • 2024
  • SmithCo Side Dump Trailers
  • SX5
  • SX5 4938
  • Dump
  • Frame: 49' | Tub: 38’
  • 102”
  • 8’ 7” at Tub side, 9’ 10” at Center
  • 2" Kingpin, 18" Setting, Replaceable Type
  • 25,000 lbs | (1) 16.6K Air Ride/Lift/Steerable 1st axle,
  • Waterfull: 25 cu yd
  • 34 cu yd
  • Fenders: Front & Rear, 1/4" Synthetic, 7 Degree Slope
  • 80/100 KSI, Fabricated Steel I-Beam
  • 5
  • 12 Volt ICC w/ Sealed Harness
  • Air Ride Suspension Standard; Spring Ride Available in Limited Configurations
  • Min. Tractor Hydraulic Reqs: 25-30 GPM | 2,600-2,800 PSI | 10 Gallon Reservoir
  • Steel Disc, 8.25 X 22.5 (16), 9 X 22.5 on Steerable/lift (2)
  • 11 R 22.5 G Radial Tires (18); Steer Option: 11 R 22.5 H | Radial Tires (16), 295/75 R 22.5 on Steerable/lift (2)
  • ABS 2S1M Anti-Lock Brake System | 16 ½” x 7”
  • Landing Gear: Two Speed, Non-Load Bearing | Bumper: Push Bar Type, Bolt-On | Cylinders: 3500 PSI, 5" bore | Hinges: Self-Aligning, Spherical Bearing Type (greaseable) | Hubs: 10 Hole, Hub Piloted | Drums: Outboard Mount, Cast Steel | Mud Flap: (2) Polyline Anti-Spray Splash Guard w/SmithCo name | Paint: Polyurethane, any combination of gray, white or black
  • Tub: 1/4" Thick, AR400 Steel (or equivalent) | 3/16" Thick, AR400 Steel (or equivalent) | External Column Supports, No Center Tub Divider