2024 SmithCo Side Dump Trailers SHV Tub S2-4034

Information

2024 SmithCo Side Dump Trailers SHV Tub S2-4034

SmithCo’s Super High Volume tub was designed for wet, low density payloads such as sludge, wet distillers, high moisture manure, processing waste, and pumice.

This tub has the largest water-level tub capacity in the SmithCo product line. The SHV tub dumps only to one side, and is available in all SX Series axle configurations.

Features may include:
  • Stockpile or windrow
  • Watertight; no leaks
  • AR400 Steel Tub, One Piece Floor
  • 80/100 KSI Steel Frames
  • One Center Tub Divider
  • Shot Blast Paint Prep
  • Polyurethane Paint

Photos

Highlights

  • Buellton, California
  • 2024
  • SmithCo Side Dump Trailers
  • SHV Tub S2-4034
  • Fenders: Front & Rear, ¼” Synthetic
  • Available
  • 8' 6"
  • 10’ height across entire trailer

Specifications

  • 2024
  • SmithCo Side Dump Trailers
  • SHV Tub
  • S2-4034
  • Dump
  • Frame: 39’ 5” | Tub: 34’
  • 8' 6"
  • 10’ height across entire trailer
  • 25,000 lbs
  • Waterfull: 38 cu yd
  • Depends on the critical angle of repose of material.
  • Fenders: Front & Rear, ¼” Synthetic
  • 80/100 KSI, Fabricated Steel I-Beam
  • 12 Volt LED ICC w/ Sealed Harness
  • Air Ride Suspension Standard; Spring Ride Available
  • Min. Tractor Hydraulic Reqs: 25-30 GPM | 2,600-2,800 PSI | 10 Gallon Reservoir
  • Steel Disc, 8.25 x 22.5
  • 11 R 22.5 G Radial Tires
  • ABS 2S1M Anti-Lock Brake System | 16 ½” x 7”
  • Landing Gear: Heavy Duty, Load Bearing Landing Legs are Standard | Bumper: Push Bar Type, Bolt On | Cylinders: 3500 PSI, 5” Bore | Hubs: 10 Hole, Hub Piloted | Drums: Outboard Mount, Cast Steel | Mud Flap: (4) Polyline Anti-Spray Splash Guard | Paint: Polyurethane, any combination of gray, white or black
  • Tub: 3/16" Thick, AR400 Steel Floor (1/4” available) | 1/8" Thick, 80 KSI Steel Sides (3/16” AR400 available)